Bärtschi-FOBRO AG manufactured in the past single machines for lawn renovation. From these small beginnings a very specific niche market shall result. Completely special machines are developed, which are used by lawn renovation specialist and which satisfy only the highest demands.

FOBRO Ferti-Sport

To bring in slow release fertilizer under the root layer. All 10 cm a slot becomes milled out approx. 8 cm deep and air-supported the fertilizer is put down into the slot.

FOBRO Ferti-Sport

At the same time an over seed can be made into the earth stream.

FOBRO Activ-Rake

A real versatile equipment. The front and rear roller leave an absolutely flat terrain. Between the rollers four rows of tines in a distance of 6 cm are fixed. Over a particularly for the Active-Rake manufactured drive (similar a 4 cylinder boxer engine) these tine rows are moved individually about 600 times in the minute sideways back and forth.

FOBRO Activ-Rake

This equipment is refining, loosening, levelling and equalizing as preparation to the seed. The seed can be made with the same equipment separately or in one processing step as shown in the picture with a second machine attached on the rear. Since 10 years the system is already in use and shows outstanding results particularly in the problem zones (goal area).

FOBRO Sport-Air

On width of 2,4 m the whole lawn becomes approx. 25 cm deep under-cut and broken. That results in a maximum aeration. At the same time liquid fertilizer is brought into the depth, whereby root growth is supported.

FOBRO Sport-Drain

Approx. all 20 cm a 2 cm broad slot becomes milled out and filled immediate thereafter with gravel. This surface drainage serves in heavier soils tending to compression as feeder to the main drainage.